苏州博兰特实验室家具系统工程有限公司

  GM-09钢木实验桌

Metal Frame: Vertical Frame: 2mm thick, 60x40mm steel pipe welded. 
Front beam: 2mm thick, steel-plated, fixed on vertical frame with screw and tensile nail.
Back beam: 2mm thick, steel-plated, fixed on vertical frame with screw and tensile nail.
Lower beam: 2mm thick, steel-plated, fixed on vertical frame with screw and tensile nail.
Adjustment foot: 4mm spiral pole with water proof and antirust base.
    
Work surface: 12.7mm acid and alkali resistance plate, Lip at the front edge of the work surface ensures that any spillage is containedwithin the work zone, brand being self-chosen.
Door: 18/16mmEOUJIA high quality plate, polyester resin coating treatment, water proof PVC sealing edging.
Hinge: high quality hinge special for laboratory.
Side plate: 18/16mmEOUJIA high quality plate, polyester resin coating treatment, water proof PVC sealing edging.
Drawer bottom plate: 18/16mmEOUJIA high quality plate, polyester resin coating treatment, water proof PVC sealing edging.
Handle: ABS or aluminum alloy tailor-made for laboratories.
Laminate: 18mmEOUJIA machine-made plate, polyester resin coating treatment, water proof PVC sealing edging.
 Electrical Power: 220V socket, about one group socket per meter.
Adjustment:water proof.
Baseboard: 18mmEOUJIA machine-made plate, externally bonded with 100mm anti-fire plate, equipped with ABS high low control angle to isolate vapor.
Pipe sink: 18mm high-density fiberboard, surface bonded with white plate, sealing treatment at the edge.
 Sink: 6mm PP made in Taiwan, strong acid and strong alkali resistance, integral forming.
Water fittings: copper single faucet resisting acid and alkali through paint baking, PVC outlet easily for disassemble and cleaning, made in 发布herlands.
 Falling water head: filtering with odor blocking and water proof function, easily for disassemble and maintenance (pp three elements is equipped, double protection)
 Reagent shelf: first class cold rolled steel plate through acid bathing and epoxy baking.
Guardrail: made of aluminum alloy, paint baked and plastic sprayed. Laminate of medicine shelf: 10mm explosion protection glass, high low control button, power switch can be installed on the lower part of the medicine shelf.
    
品牌型号:苏州博兰特---型号GM-09
尺寸规格:常规尺寸为长度依照要求/靠边桌宽度750mm中央桌宽度1500mm /高度850mm,非标尺寸依照要求制作.
台面说明:采用16mm厚(EPOXY)环氧树脂台面,可耐强酸强碱之腐蚀,耐高温600℃,边缘加厚到25mm.或另选台面(理化板/千思板/陶瓷板/不锈钢板)
框架说明: 采用40*60镀锌方管焊接成型, 表面喷涂75-80um奥地利老虎牌(TIGER)户外抗腐蚀环氧树脂粉体.
柜体说明:采用16mm E1环保级优质三聚氢氨板，内面经POLYESTERRESIN（不饱和聚脂树脂）高压被覆处理，边缘部分并以进口PVC封边条封边防水处理。
面板说明: 采用18mm E1环保级优质三聚氢氨板，内面经POLYESTER RESIN（不饱和聚脂树脂）高压被覆处理，边缘部分并以进口PVC封边条封边防水处理。
滑轨说明:抽屉导轨为广东东泰(DTC)三节超静音高档滑轨.
铰链说明:柜门铰链采用广东东泰(DTC)气压泵缓冲型高档铰链.
把手说明:抽屉及柜门把手采用PVC一字隐形抗腐蚀实验室专用把手.
电源说明:电源插座为86型220V-10A多功能六眼插座,插座盒为PVC防腐蚀材质,约每米配备一套.
调节角说明:为适应地面平整柜体底部设有为M8螺竿塑料调节脚4只.
 
        
特别提示：以上苏州实验室 钢木实验桌 钢木试验台 实验家具 中央实验桌的供应由苏州博兰特实验室家具系统工程有限公司自行免费发布，仅供参考。该苏州实验室 钢木实验桌 钢木试验台 实验家具 中央实验桌产品信息的真实性、准确性及合法性未证实。请谨慎采用，风险自负。如需了解更多关于苏州实验室 钢木实验桌 钢木试验台 实验家具 中央实验桌的产品规格型号及批发价格或产品图片等详细参数说明资料；您可以进入苏州博兰特实验室家具系统工程有限公司网站咨询。本页收录查询：苏州实验室 钢木实验桌 钢木试验台 实验家具 中央实验桌
复制本页链接：http://www.wawangluo.com/gongying/show-12368.html